Sign In | Join Free | My chinacomputerparts.com
China Sinuo Testing Equipment Co. , Limited logo
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Verified Supplier

4 Years
Home > EV Connector Testing Equipment >

IEC 62196 Dual Station Label Marking Abrasion Test Apparatus

Product Categories
Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IEC 62196 Dual Station Label Marking Abrasion Test Apparatus

Brand Name : Sinuo

Model Number : SN1101B

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Payment Terms : T/T

Supply Ability : 10 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Export packing

Application force : 5±1N

Drive mode : Electric

Test Cycle : 0-9999 cycles

Test speed : One cycle/s

Electrical control method : Button control

Sample clamping method : Mechanical clamping

Contact Now


IEC 62196 Dual station Label Marking Abrasion Test Apparatus

Complied Standards & Clauses


This label marking abrasion test apparatus conforms to IEC 62196-1:2022 clause 8.7, figure 8.


Product Overview

It is utilized to assess the endurance of the marking. The examination is conducted by wiping the marking for 15 seconds with a cotton cloth moistened with water, followed by another 15 seconds with a cotton cloth soaked in 95% n-hexane (Chemical Abstracts Service Registry Number, CAS RN, 110-54-3). After testing with water, the marked surface shall be dried. Rubbing should begin immediately after soaking the cotton piece, applying a pressure force of (5 ± 1) N at an approximate rate of one cycle per second (one cycle consisting of a forward and backward stroke along the marking’s length). For markings exceeding 20 mm in length, rubbing may be restricted to a section of the marking over a path of at least 20 mm. The pressure force is exerted using a test piston wrapped with cotton, which consists of cotton wool enclosed by a layer of medical cotton gauze. The test piston must conform to the dimensions in Figure 8 and should be composed of an elastic material resistant to the test liquids, possessing a Shore-A hardness of 47 ± 5 (such as synthetic rubber).


Technical Parameters

Test station 2 stations
Electrical control method Button control
Drive mode Electric
Sample clamping method Mechanical clamping, clamping point position is adjustable
Test Cycle 0-9999 cycles, can be preset
Test speed One cycle/s (a cycle comprising forward and backward movement along the length of the marking)
Force 5±1N,applied by a weight
Test piston NF C 61-314 figure 48,rayon, Shore-A hardness shore A 47± 5

Details

IEC 62196 Dual Station Label Marking Abrasion Test ApparatusIEC 62196 Dual Station Label Marking Abrasion Test Apparatus


Product Tags:

IEC 62196 Abrasion Test Apparatus

      

Dual Station Abrasion Test Apparatus

      

Label Marking Abrasion Test Apparatus

      
China IEC 62196 Dual Station Label Marking Abrasion Test Apparatus factory

IEC 62196 Dual Station Label Marking Abrasion Test Apparatus Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Sinuo Testing Equipment Co. , Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like